Best Framing Squares of 2022

You may not think you need a framing square to build your house, but as an experienced carpenter, I can tell you that I use it all the time. It is such an underrated tool, and yet it is one of those things that will make construction so much easier. So, if you’re looking to purchase the best framing square, here are some tips on what to look for.

Related:
Best Wood Chisels: Top 10 Reviews, Comparisons and Buying Guide

Table of Contents

  • 10 Best Rated Framing Squares: An Overview
  • 1. IRWIN 1794447 Framing Square
  • 2. POWERTEC 80008 Steel Framing Square
  • 3. Swanson T001WZ Framing Wizard
  • 4. VINCA SCLS-2416 Framing Steel Square
  • 5. Woodraphic Precision Square
  • 6. Johnson Level & Tool CS5 Aluminum Framing Square
  • 7. Milescraft 8410 MC-Square300
  • 8. Milwaukee MLSQ024 Framing Square
  • 9. Stanley 45-300 Aluminum Carpenters Square
  • 10. Starrett FS-24 Steel Professional Framing Square
  • 8 Things to Consider When Buying the Best Framing Square
  • What is a framing square?
  • Carpenter Square vs Framing Square
  • Framing Square Tips and Tricks
  • Framing Square Use
  • How to Layout Stair Stringers with Framing Square
  • How to Cut Rafters with A Framing Square
  • Video: How to Cut Rafters with a Compound Miter Saw
  • How to Use Stair Gauges on A Framing Square
  • How to Lay Out Steps with A Framing Square
  • What Do All the Numbers on A Framing Square Mean?
  • How to Check If A Framing Square Is Square
  • FAQs about Framing Square
    • How to use 1/8 scale on framing square?
    • How to use a framing square to calculate roof pitch
    • How to cut a 22.5 angle with a framing square
    • How to clean framing square

10 Best Rated Framing Squares: An Overview

1. IRWIN 1794447 Framing Square

CHECK PRICE ON AMAZON

Looking to frame that perfect picture? Look no further than the IRWIN 1794447 Framing Square! This handy tool will help you get the perfect measurements every time, whether you’re a professional framer or just an amateur enthusiast.

The IRWIN 1794447 Framing Square is an indispensable tool for any carpenter. It makes it easy to create perfect 90-degree angles, ensuring that your construction or renovation project is precise and professional.

This IRWIN 1794447 Framing Square is perfect for any carpentry project! Its durable construction will last through even the most challenging projects. And with its easy-to-use design, it’s ideal for anyone who wants to get started in carpentry!

Pros

  • Precision workmanship
  • Durable and lightweight aluminum body.
  • Easy to read markings on blue background.
  • Professional tool with multiple scales – perfect for any job!

Cons

  • It can be a bit cumbersome to use, as it is larger than many other framing squares on the market.

2. POWERTEC 80008 Steel Framing Square

CHECK PRICE ON AMAZON

This POWERTEC Steel Framing Square is a must-have for any builder, contractor, or handyman. It’s made of durable steel and has a precision finish that makes it perfect for all your measuring needs. In addition, with its easy-to-read markings, you’ll be able to get the job done quickly and accurately.

This square is perfect for framing, laying rafters and stairs, and more. It can be used as a straight edge or to find and establish right angles. Its sturdy construction makes it great for marking cut-offs on the wide stock.

The POWERTEC 80008 Steel Framing Square is just what you need for all your framing needs. With its heavy-duty steel construction, this square will quickly work on any project. In addition, the laser-etched markings make it easy to get precise measurements every time. So make your next project a breeze with the POWERTEC 80008 Steel Framing Square!

Pros

  • Quick and easy to use for a variety of applications.
  • It is constructed from durable and high-quality materials.
  • It provides perfect measurements every time.
  • Allows you to work smarter, not harder
  • Get the perfect cut every time with this framing square.

Cons

  • It can be a bit difficult to read the measurements in some cases, as the lines are very thin.

3. Swanson T001WZ Framing Wizard

CHECK PRICE ON AMAZON

Looking for an easy way to frame your photos and artwork? Look no further than the Swanson T001WZ Framing Wizard!

This handy tool makes it fast and straightforward to create custom frames without worrying about measurements or complex instructions. With the Framing Wizard, you can select from various frame styles and colors, making it easy to find the perfect look for your project.

This multi-functional tool includes all of the features of five popular tools: a framing square, miter square, angle finder, saw guide, and try square. So whether you’re a professional contractor or just starting on your home projects, this tool is perfect for anyone who wants to get the job done right.

Don’t miss out on this essential addition to any toolbox – order your Swanson T001WZ Framing Wizard today!

Pros

  • Accurately measure angles and distances.
  • Mark stud plates for easy installation.
  • Save time with the Swanson diamond cutout, which saves you from buying a framing square or trying square separately.
  • You’ll be able to build more homes in less time.
  • You’ll feel like a professional carpenter every day of the week.

Cons

  • The directions are a little confusing

4. VINCA SCLS-2416 Framing Steel Square

CHECK PRICE ON AMAZON

Looking for a framing square that’s built to last? Look no further than the VINCA SCLS-2416 Framing Steel Square! This top-quality square is designed to make your carpentry work faster and easier than ever before.

It’s made of durable steel construction with a precision laser-etched ruler for accurate measurements every time. Made with precision and care, this square is perfect for any carpenter looking to get the job done right.

Made with high-quality 1cr13 hardened steel, this square is accurate to within 0.0573°, ensuring precise measurements time and again. The durable punching press finish also prevents rusting, making it a long-lasting tool you can rely on.

So don’t go another day struggling with substandard tools – get yourself a VINCA SCLS-2416 Framing Steel Square and see the difference it makes!

Pros

  • Durable and long-lasting.
  • Higher accuracy than most other framing squares
  • Easy to use for beginners
  • You’ll be able to measure things more precisely than you ever have before.

Cons

  • The square has a length of 24 inches, a width of 16 inches, and a thickness of 0.04 inches. This means it may not be as easy to store or carry around.

5. Woodraphic Precision Square

CHECK PRICE ON AMAZON

With the Woodraphic Precision Square, you’ll be able to measure and mark your workpieces with ease accurately! This handy tool is durable aluminum and steel, making it perfect for professional carpentry use. In addition, the 100mm size is ideal for a variety of applications.

Precision is vital in any crafting or design project, and this square ruler is the perfect tool to help ensure accuracy. Each aluminum blade has been precisely milled with state-of-the-art MCT equipment, ensuring that your lines and markings will be crisp and accurate.

Take your woodworking projects to the next level with Woodraphic Precision Square! The laser-engraved scale markings are easy to read, making them perfect for any DIY enthusiast. In addition, the durable construction ensures lasting use. Order yours today and see the results for yourself!

Pros

  • Make precision cuts with ease.
  • Guaranteed accuracy.
  • Build a project from start to finish in a single sitting.
  • Easy to use
  • Get the perfect design every time
  • No more guessing where to make your marks

Cons

  • It is a bit more expensive than some other options.

6. Johnson Level & Tool CS5 Aluminum Framing Square

CHECK PRICE ON AMAZON

Looking to get a precise measurement for your next carpentry project? Then you need the Johnson Level & Tool CS5 Aluminum Framing Square! This handy tool is made of durable aluminum and can help you make accurate right-angle measurements quickly and easily.

Its 16″ x 24″ size is perfect for various tasks, and the permanently stamped graduations and tables make it easy to get the job done quickly and accurately. In addition, the aluminum construction is lightweight and rust-resistant, so you can be confident this tool will last long-term.

This high-quality framing square is perfect for any carpentry or construction project. With its precision measurements and durable aluminum build, it will make your work easier and more accurate. So don’t go into your next project without the Johnson Level & Tool CS5 Aluminum Framing Square.

Pros

  • Lightweight, durable construction.
  • Permanent graduations and tables for convenience.
  • Get the job done quickly with this tool.
  • You’ll never have to worry about the graduations wearing off.
  • This tool will last for years without rusting or fading away.

Cons

  • It can be a bit difficult to read the measurements on the ruler if it is not aligned perfectly with the light.

7. Milescraft 8410 MC-Square300

CHECK PRICE ON AMAZON

Do you need to measure and mark the inside and outside of your workpiece? Well, have we got the perfect tool for you!

With the Milescraft 8410 MC-Square300, you can make your woodworking dreams a reality! This versatile tool lets you create perfect 300mm squares with ease – great for everything from furniture construction to cabinetmaking.

The MC-Square300 is also perfect for creating right angles, so you can be sure your projects are always precise. The ergonomic design makes it easy to use, even if you’re a beginner.

So if you’re ready to take your carpentry skills up a notch, make sure you add the Milescraft 8410 MC-Square300 to your arsenal.

Pros

  • Measurements are easy to read and can be taken from multiple angles.
  • You’ll never have any doubts about the accuracy of your measurements again.
  • Precisely mark the inside and outside of your workpiece with notches.
  • Work more efficiently so you can spend less time measuring, marking, and scribing.

Cons

  • The arms open to only 3 1/2″, so it may not accommodate larger pieces of material.

8. Milwaukee MLSQ024 Framing Square

CHECK PRICE ON AMAZON

The Milwaukee MLSQ024 Framing Square is a versatile and essential tool for any construction or carpentry project. Its 24-inch size makes it perfect for framing, measuring, and layout work, while the precision etched markings provide accurate measurements every time.

The rugged aluminum construction ensures durability and long life. Whether you’re a professional contractor or a DIY enthusiast, the Milwaukee MLSQ024 Framing Square is a must-have tool for your toolbox.

With its durable construction and precise measurements, it will help you get the job done right every time. So don’t go another day struggling with substandard tools – grab a Milwaukee MLSQ024 Framing Square and get to work!

Pros

  • It’s stronger than steel.
  • It’s built to last and is stronger than steel.
  • Stay on budget with the right tools.
  • The markings are easy to read.
  • You’ll be able to easily measure the angles of pipes, which will help with construction projects.

Cons

  • It can be cumbersome to use in tight spaces.

9. Stanley 45-300 Aluminum Carpenters Square

CHECK PRICE ON AMAZON

If you’re looking for a carpenter square that’s both tough and lightweight, you’ll love the Stanley 45-300 Carpenters Square. It is made from durable aluminum to handle even the most challenging tasks. In addition, it’s easy to carry around, so you can take it wherever you need it.

The Stanley 45-300 Square is perfect for any carpenter! This square offers a wide range of easy-to-read measurements, tables, and conversions.

It’s also equipped with helpful reference conversion, including new lumber, decimal equivalent, and metric conversion tables. The high tempered aluminum construction ensures maximum durability, while the protective lacquered coating and buffed finish keep it looking great for years to come.

Pros

  • The perfect tool for any carpenter.
  • Accurate measurements and conversions.
  • A trusted companion on your next project.
  • It’s lightweight, durable, and accurate.
  • The markings are deep, so they’ll last a long time

Easy to read measurements

Cons

  • It can be difficult to read due to its small size

10. Starrett FS-24 Steel Professional Framing Square

CHECK PRICE ON AMAZON

Looking for a framing square that’s guaranteed to deliver professional results? Look no further than the Starrett FS-24 Steel Professional Framing Square.

It features a permanently etched scale and plum guide that is easy to read, ensuring perfect results every time. Its durable steel construction ensures accurate measurements, while the etched graduations provide precision alignment. The included Try Square function allows for even more accuracy when creating right angles.

Starrett FS-24 Steel Professional Framing Square is precision engineered and crafted from the highest quality materials to provide you with a durable, long-lasting tool that will make your job easier. With its precise measurements and finely detailed markings, this framing square will allow you to complete any framing project with professional results efficiently.

Pros

  • It will help you frame your artwork perfectly.
  • You can make sure that your frames are straight.
  • Frame with confidence and precision
  • The 24″ x 2″ body is made from tempered steel.
  • Clear coating helps to prevent rust.
  • It’s a perfect gift for the DIYer in your life.

Cons

  • Some people may find it difficult to read the markings on the ruler.

Related: Best Torpedo Levels: Top 10 Reviews, Comparisons and Buying Guide

8 Things to Consider When Buying the Best Framing Square

When it comes to carpentry and construction, having the right tools can make all the difference. Of course, one of the essential tools for precision is a framing square. How do you choose the right one for you with so many options available?

Here are some things to consider when choosing a framing square:

Intended purpose:

The first thing to consider is what you will be using the framing square for. If you need an accurate and durable tool, you should look for a model with the high build quality. If you need something easy to read and measure, opt for a large graduations model.

Material:

Framing squares are made from various materials, including plastic, aluminum, and steel. Steel is the most durable material, but it is also the heaviest. Aluminum is a good compromise between weight and durability, while plastic is the lightest and least durable.

Accuracy:

Accuracy is one of the most important factors to consider when choosing a framing square. A square that is off by even a few degrees can cause serious mistakes in your work. Therefore, look for a model with high precision to ensure accuracy.

Readability and graduations:

The next thing to consider is how easy the framing square is to read and measure. Some models have large graduations that are easy to see at a glance, while others have small graduations that are difficult to decipher. Choose a model that is easy to read and has clearly marked graduations.

Durability:

Many framing squares come with a guarantee of durability, but some do not. When choosing a square, it is essential to consider how durable the model is and its warranty. Look for a square with high-quality aluminum or steel so it won’t warp, bend, or break easily. Furthermore, look for a square that comes with at least a three-year warranty so you can get replacements if anything goes wrong.

Measurement system:

Framing squares use either fractions or decimals on their scales to measure distance and angles. Decimals provide more accurate measurements; however, people find them difficult to read. Fractions are easier to read but are less precise.

Inch divisions:

Most framing squares have inch measurements on their scales. If you need a square that can measure both metric and imperial distances, look for one with dual scale graduations.

Informational tables:

Framing squares often come with informational tables, so you have all of the information you need in one place. Some squares even feature symbols that provide additional data about floor layouts or roof pitches. Look for a square that comes with tables full of valuable advice to save you time and money on your next project.

What is a framing square?

A framing square is a measuring instrument used to align objects. It has equal length arms, slides on the other, usually attached at either end to a head containing an alidade (a transversal cross) that can be calibrated – for convenience, in decimal fractions or degrees. The object being aligned can then be exactly horizontal or vertical as required.

There are two basic types: wood and metal, each defined by its material-the former is typically made of aluminum alloys with risers installed to increase stiffness; the latter is generally made of stainless steel. A larger folding carpenter’s square sometimes referred to as “the bible,” can be quickly converted into a compact framing square by removing the handle. All metal framing squares have a v-groove on the hypotenuse (sliding) arm for measuring and scribing angles in Mitre joints.

Framing squares are also used as try squares to test the accuracy of right angles. A framing square may also be used as a saw guide; the short arm can be clamped against the edge of the workpiece, and the long arm is used as a guide for the saw blade.

The history of the framing square is unknown, but it is thought that they were invented in either Europe or Asia. The first documented use of a framing square was in 17th century France.

Today, framing squares are still used by carpenters, woodworkers, and metalworkers. They are also used in construction and home improvement projects.

Thank you for reading! We hope this article has been helpful. Please visit our website or contact us today for more information on framing squares.

Carpenter Square vs Framing Square

When it comes to carpentry, a few tools are essential for any craftsman. The framing and carpenter square are two of the most common tools used in carpentry, but what is the difference between them? In this article, we will look at the differences between these two squares and explain which one is better for specific applications.

The framing square is typically used when constructing frames or boxes out of wood. It has a 45-degree angle on one side and a 90-degree angle. The square is also marked with several measurements, including 16 inches, 12 inches, and 9 inches.

Carpenter squares measure and mark angles or draw lines perpendicular to a surface. It is commonly used to mark rafters, door jambs, stairs, and other carpentry joints.

While both squares are typically made out of metal or wood with markings on them, some key differences between them will influence which one you choose for your application. For example, a carpenter square most often has two 90-degree angles at either end, whereas the framing square most often has only one 90-degree angle at one end and a 45-degree angle cut into the opposite side. The 45 degrees are set against the straight back edge of the carpenter’s square to make sure that they intersect at the correct point on the inside corner joint. Additionally, an additional line is usually toward the middle of the carpenter’s square that allows you to snap a chalk line at precisely 90 degrees. Framing squares typically do not have this additional middle line and are usually used for more rough cuts like those found in framing walls or laying out rafters.

When choosing which tool is right for your project, it’s essential to know the limitations of each one to make sure the piece comes out the way you want it to. For example, while a framing square may be a fine choice for creating a picture frame, it limits how much control you have over your angles and tends to leave an oversize corner on the finished product if you aren’t careful. This can be less than ideal when going for a precise angle or perfect fit. On the other hand, a carpenter square can cause the opposite problem in that it’s limited to 90-degree angles which can leave your cuts a little rough or boxy. However, when using it for its intended purpose of marking outboards and pieces for cutting from larger stock, rather than specific cuts with tight tolerances, either one can produce great results.

When working on larger projects, framers typically use framing squares because they are designed to help you layout everything at once so that it fits together perfectly every time. However, suppose you are mainly doing smaller projects with tighter tolerances. In that case, a carpenter square will likely be more suited for your needs as it allows you to pick up lengths of lumber quickly and produce accurate cuts easily. Either square is an excellent choice, and it’s just a matter of preference as to which one you prefer to work with based on your tastes and the size and type of project you are working on.

Framing Square Tips and Tricks

  1. A framing square can be used as a level. Place the square’s edge against the surface you are trying to level and look at the bubble to get an accurate reading.
  2. The framing square can also be used as a straight edge. Align one side of the square with the edge you want to be straight and use it as a guide for your saw or other tools.
  3. If you need to make a mark that is perpendicular to another mark, use the framing square. To find the intersection of the two lines, align the square’s edge with one of the marks.
  4. When measuring distance, use the inside corner of the framing square as the starting point. Then measure the length you need with measuring tape. The edge of the framing square can act as a ruler.
  5. The framing square can also be used to raise or lower your circular saw blade, so it is at an optimal height for making cuts on wood, drywall, or plasterboard.
  6. If you need to cut long, straight lines but don’t have anyone available to hold your guide piece in place, use the side of the framing square behind your material as a guide for your saw or other tools that creates a straight line (like power shears). Make sure that no portion of either end of the square is within 5cm (2 inches) of both ends of your material; otherwise, the cut won’t be accurate.
  7. A framing square can also be used to measure hard-to-reach angles, such as the inside corners of cabinets or other nooks and crannies. In these situations, it helps to have the edge of one side of the framing square in line with one part perpendicular to your measurement. It then holds a pencil or reliable marking tool near the opposite corner, so you have something to mark against when making your measurements for cutting plywood outside corners for cabinet installation.
  8. The circular saw’s blade has a crossbar hole in it where a triangular piece fits through. If you need to make an angled cut but don’t have a guide piece, use this hole with your framing square. First, align one of the short sides of your framing square with the blade and then, using a pencil or dedicated marking tool, hold the point you need to make a mark against in line with the crossbar hole in the saw blade.
  9. When cutting pieces for a project requiring 45-degree angles, it is easier to cut them together rather than individually. Use your framing square as a guide by resting one of its sides on one board and holding another board tightly against this side. Then use two screws driven into the end section of each board to hold everything in place while you cut along your designated line using either power shears or a circular saw fitted with a straight edge guide attachment.
  10. Try using a clamp if you are having trouble getting your framing square to stay in place while measuring or marking. Place the clamp around the outside edge of the framing square and then tighten it until the square is secure. This will help to ensure accurate measurements and markings.

Framing Square Use

There are many ways to use a framing square, and each has its specific purpose. However, some of the most common ways to use a framing square are as follows:

1. To mark out a right angle

This is probably the most common use for a framing square, as it allows you to ensure that your cuts are precise and accurate.

2. As a depth guide

When cutting a hole in a piece of wood, you can use the framing square to ensure that the hole is in the correct depth.

3. As a saw guide

If you’re using a power saw to make your cuts, you can use the framing square as a guide to ensure that your cuts are straight.

4. To make compound cuts

A framing square can also be used to make compound cuts at an angle other than 90 degrees.

5. As a straight edge

In addition to its use as a saw guide, the framing square can also be used to mark outlines and measurements.

6. As a level

The framing square can also be used as a level, which can come in handy when you’re trying to ensure that your cuts are straight.

7. To find the center of a piece of wood

You can use the framing square to find the center of a piece of wood by drawing diagonals from opposite corners.

8. As a T-square

If you need to make a cut perpendicular to the edge of a piece of wood, you can use the framing square as a T-square.

9. As a miter gauge

If you’re making cuts at an angle, you can use the framing square as a miter gauge to ensure that your cuts are accurate.

10. As a depth stop

You can also use the framing square as a depth stop to prevent your saw from cutting too deep into the wood.

These are just some of how you can use a framing square. With such a versatile tool, there are many other uses that you can find for it. So, if you’re looking for a tool that can help you with all your woodworking projects, the framing square is a tool that you should consider adding to your toolbox.

How to Layout Stair Stringers with Framing Square

The framing square is a highly versatile tool that can be used for various tasks, including laying out stair stringers. To use the framing square to layout stair stringers, you will need to measure the rise and run of the stairs. The rise is how high the stairs are from one landing to the next, and the run is how long they are from one step to the next. Once you have measured the rise and run, you can use the framing square to draw a diagonal line between the two measurements. This line will indicate where your stair stringer should be positioned. You can then use a saw to cut along this line to create your stair stringer.

If you are creating a set of stairs with a landing, you will need to measure the rise and run of each set of stairs. Next, draw a diagonal line with your framing square from the landing where you end one stair stringer to the next. Then mark this length on your other stringers as well. Finally, you can use a saw to cut along this line to create all of your stair stringers.

That is how you layout stair stringers using a framing square!

How to Cut Rafters with A Framing Square

A few simple steps can be followed to cut rafters with a framing square:

  1. The rafter should be measured and marked at the desired length.
  2. The framing square should be placed so that the blade aligns with the rafter mark. The angle of the cut should then be adjusted so that it matches the desired pitch of the roof.
  3. The saw should be guided along the edge of the framing square to cut.

Ensuring that all cuts are made accurately is crucial to providing a stable roof structure. Anyone can easily cut rafters using a framing square by following these simple steps.

If you’re looking for an even easier way to cut rafters, check out this video!

Video: How to Cut Rafters with a Compound Miter Saw

How to Use Stair Gauges on A Framing Square

Stair gauges are used to make sure your stairs are level. You can use a framing square to make sure the rise and run of your stairs are correct. To use stair gauges, first set the framing square on the edge of the stair tread. Make sure the thin edge of the framing square is facing up. Then, adjust the stair gauges to fit snugly against the side of the framing square. Next, measure the distance between the top of one stair gauge and the bottom of the other stair gauge. This measurement should be equal to the rise of your stairs. Finally, measure the distance between the front edge of one stair gauge and the back edge of the other stair gauge. This measurement should be equal to the run of your stairs. If the measures are not equal, you will need to adjust the rise and the run of your stairs.

Stair gauges can also be used to make sure your walls are plumb. To use stair gauges for this purpose, first set the framing square on the wall so that the thin edge of the framing square is facing out. Then, adjust the stair gauges to fit snugly against the side of the framing square. Next, measure the distance between the top of one stair gauge and the bottom of the other stair gauge. This measurement should be equal to the thickness of your wall. Finally, measure the distance between the front edge of one stair gauge and the back edge of the other stair gauge. This measurement should be equal to the width of your wall. If the measures are not equal, you will need to adjust the thickness or width of your wall.

How to Lay Out Steps with A Framing Square

It is important to use a framing square to frame a house to ensure the walls are straight and level. The framing square can also be used to layout steps. Here are a few steps on how to do so:

  1. Decide on the width of the step. This will be based on the thickness of the material you are using and the risers you want.
  2. Mark out the step location with a pencil.
  3. Place the framing square so that the diagonal line intersects both marks.
  4. Next, draw a line perpendicular to this line to create your step outline.
  5. Cut out the step shape with a saw.
  6. Sand down any rough edges.
  7. Finish the step with a sealant or paint.

What Do All the Numbers on A Framing Square Mean?

Are you trying to figure out all the numbers on your framing square mean? Don’t worry; it’s not as complex as it looks. The numbers on a framing square indicate the following:

  • The first number is the length of the arm in inches.
  • The second number is the width of the triangle in inches.
  • The third number is a 16th-inch measurement. This indicates how many 16ths of an inch are equal to one inch on the arm.
  • The fourth number is a fraction that tells you what percentage of the triangle’s width equals the arm’s length.

For example, if you have a framing square with the numbers 12″ x 3″, the arm is 12 inches long, and the triangle is 3 inches wide. So, the third number (16th-inch measurement) would be 1/16th, and the fourth number would be 6/16th, or 3/8. So, if you need to layout a corner post that is 10″ long, you would find the 10″ mark on the arm and then measure over 3/8″ from that point to make your mark.

How to Check If A Framing Square Is Square

To check if a framing square is square, you can use the following steps:

  1. Place the framing square on top of the object you want to check. Make sure that the object is resting flat against the framing square.
  2. Look at the corner where the two arms of the framing square meet. The angle between these two arms should be 90 degrees.
  3. If the angle is not 90 degrees, your framing square is not square. You can adjust it until the angle is 90 degrees.
  4. Once the angle is 90 degrees, you can use the framing square to mark perpendicular lines.

It’s important to note that a framing square is not always 100 percent accurate. So if you are looking for exact measurements, you may want to use another tool. But for most general purposes, a framing square will do the trick.

FAQs about Framing Square

How to use 1/8 scale on framing square?

To use a framing square, you need first to understand the different scales. The two most common scales are 1/4″ and 1/8″. While both can be useful, the 1/8″ scale is smaller and more precise, making it better for more detailed work.

To use the 1/8″ scale on a framing square, you’ll first need to determine which side of the square corresponds to 1/8″. On most squares, this will be the smaller, innermost line. Once you’ve decided which side corresponds to 1/8″, you can use it to measure and mark out precise lines on your workpiece. Remember to always use the same side of the square for all measurements, or you’ll get inaccurate results.

How to use a framing square to calculate roof pitch

A framing square is a carpenter’s tool to help right layout angles for building trusses and stairs. It can also be used to measure roof pitch.

To use the framing square to calculate roof pitch, place the handle of the framing square against one point of the roofline, and extend or fold it until it reaches a second point on a similar part of the roof. Then read off where that second part should be, according to whether you extended or folded the framing square. For example, if you measured from a corner along an extension side first, you should rotate your reading 180 degrees if you’re going to take arc measurements.

The measurements are in ‘rise over run’ format instead of degree readings, so for a 12/12 roof (that is, a roof with a 12-inch rise for every 12 inches of run), the reading would be 1.0. A 6/12 roof would have a reading of 0.5, and so on.

How to cut a 22.5 angle with a framing square

First, you want to measure and mark a 22.5-degree angle on the board using your framing square.

Second, you want to draw guidelines so that when you cut along them with your hand saw, they will be precisely 22.5 degrees with the board’s top edge.

Third, you will want to use your speed square to check if the line is exactly perpendicular (90 deg) with the top and bottom edges of the wood.

Fourth, take out your jigsaw and cut along all of your guide marks until it creates a perfect 22.5-degree angle. If there are any rough spots left from your cutting process, sand them down using 120 grit sandpaper till smooth.

Fifth, you can now apply wood stain if you choose to and let it dry overnight.

Last, you will want to drill a pilot hole in the center of your 22.5 angles so that when you screw in your hook or hanger, it is flush with the backside of the board. Make sure that your pilot hole is slightly smaller than the diameter of your screws, and fill any holes with wood putty before staining.

How to clean framing square

Framing squares are among the most important tools in carpentry and construction. They’re used to make right angles, check the accuracy of cuts, and ensure that wood pieces are properly aligned. But like all tools, they need to be cleaned and maintained regularly to ensure accuracy and longevity. Here’s how to clean a framing square:

  1. Begin by brushing off any debris or sawdust from the surface of the square with a soft brush.
  2. Next, use a cloth or sponge soaked in warm, soapy water to clean the entire surface of the square. Be sure to pay close attention to the corners and edges, as these areas can be challenging to reach with a brush.
  3. Finally, rinse the square with clean water and allow it to air-dry.

By following these simple steps, you can keep your framing square in good condition and ensure accurate measurements.

Final Thoughts

With so many options to choose from, it can be a challenge to find the best framing square for your needs. We’ve taken the guesswork out of this for you by providing information about the different types of framing square and their pros/cons to help make your decision easier! Comment below if you have any questions or want more details on one specific type of framing squares that we didn’t cover here.

Leave a Reply

Your email address will not be published.