Drywall Screw Gun vs Drill: 7 Reasons to Use a Drywall Screw Gun over a Drill for Your Next project

Which is better – a drywall screw gun or a drill? Many people have asked this question, and the answer is different for everyone. When answering this question, you need to consider several factors, such as how much experience you have with either of these tools and what types of projects you plan to use them for. Read on to learn more about each tool and which one might be best for your situation!

Related: Best Drywall Sanders: Reviews, Comparisons and Buying Guide

Table of Contents

  • Are drywall screw guns worth it?
  • What is the difference between a drill and a drywall screw gun?
  • Drywall Screw Guns vs Drills Comparison
  • 7 Reasons to Use a Drywall Screw Gun over a Drill for Your Next Project
  • Can you use a regular drill for drywall screws?
  • Do I need a drill or screw gun?
  • Is a screw gun the same as a drill?

Are drywall screw guns worth it?

Drywall screw guns are an excellent investment if you are in the construction industry. According to some studies, they can reduce the time necessary to install drywall by 50%.

Drywall screw guns cost around 150 dollars, but it pays for themselves in reduced labor costs alone. Expect to increase productivity by up to 20%. Plus, they’re actually more precise, which is better for quality assurance in many senses because you won’t have any gaps in your project with regular screws. Screw guns attach effortlessly and flawlessly because of their torque and quick release features, making it faster and less strenuous on the operator’s arm or wrist. A lot of these injuries come from repetitive motions, which can be prevented with screw guns.

What is the difference between a drill and a drywall screw gun?

Great question! The answer can be a little confusing to someone who’s not familiar with the tools. To make the difference clear, let me break them down in a little more detail for you.

A drill is much larger and bulkier than a drywall screw gun. It also operates at much higher speeds and has a chuck that changes bits when needed. Unlike drills, drywall screw guns operate at a lower speed, lack the chuck for changing bits, and have an adjustable clutch so that they won’t get stuck in hard-to-reach areas or jam in tightly-held materials, like gypsum wallboard. The drywall screw gun also has a very different feed mechanism than the drill.

Drywall Screw Guns vs Drills Comparison

A drywall screw gun is a power tool to drive screws into the sheetrock or plasterboard found on interior walls and ceilings. These tools are also known as “screw guns” or “drywall drivers.”

A drill, by contrast, uses rotating bits to bore through solid materials like wood and metal. The primary difference between these two types of tools is their speed; while both can be used to drive screws, drilling requires higher torque over more extended periods, while driving screws can do so in a shorter amount of time with less force required. Although they appear similar, you should consider many other differences before purchasing either one for your construction project.


Drywall screw guns work best to drive screws into drywall. However, these tools are not designed for cutting through solid materials like wood or metal, as their driving mechanism is mainly powered by torque rather than speed.

On the other hand, Drills have two primary functions: driving screws into the material and drilling through it. Since drills can drill through objects that drywall screw guns cannot, they tend to be the tool of choice for fastening and cutting construction projects.


Drills can function as a screwdriver and a drill combined, they generally provide more versatility than drywall screw guns do. This added functionality makes them better choices when installing hardware such as cabinets and shelves because you’ll only have to purchase a single tool. Some drills also can function as a sander, a jigsaw, or a wire-wheel brush when performing other tasks such as stripping paint from wood or removing rust from metal.


A drywall screw gun is much more straightforward in its design than a drill. In general, screw guns come with two options: forward and reverse. Power typically needs to be applied before driving screws into the material, so these settings are primarily used for adjusting torque rather than speed.

On the other hand, Drills typically have adjustable speeds that can range anywhere from 500 RPMs up to 30000 RPMs or higher. This added versatility allows you to use your drill for a broader range of projects.

Ease of Use

Drywall screw guns are limited in their range of speeds and settings, which makes them less complicated to use than drills are. For this reason, they are designed to be much easier for novices to operate when installing hardware or when doing home improvement projects.

Drills have a more comprehensive range of speeds, which requires the user to have a more significant deal of control over how much pressure is applied when drilling through materials. This added level of complexity may cause some people to accidentally strip bolts or break drill bits if they don’t know what they’re doing.

However, becoming familiar with your drill will allow you to overcome this shortcoming. If your need for versatility outweighs your need for simplicity, then drills are usually the best choice.


Drywall Screw guns are cheaper than drills overall because they don’t require interchangeable bits or other attachment systems like drills do.

On the other hand, Drills tend to be more expensive because their design is more complicated than drywall screw guns, requiring a greater investment in terms of materials and labor costs.

In general, if you only need a tool for driving screws into drywall, then a screw gun will be sufficient enough. However, if you also need it to drill through objects, you’ll likely find that drills are the better choice.

7 Reasons to Use a Drywall Screw Gun over a Drill for Your Next Project

A drywall screw gun is a power tool used to drive drywall screws. It’s a lot different from a drill because there are typically only two speeds, slow and faster.

It’s designed specifically to drive drywall screws for hanging drywall or attaching drywall to studs/rafters/subflooring etc. Often drywallers will use an impact driver instead of a drywall screw gun because it does the same job but requires less effort on whoever is using it.

In addition, when using an impact driver with drywalls screws, you can also get the benefit of having stronger joints as well; this is because drywalls screws don’t strip as quickly as drywall screws do. More specifically, drywalls screws have a small drywall screw head that helps to prevent them from stripping even in soft drywall.

Related: How to Remove a Stripped Screw?

Therefore, if you’re going to be hanging drywall or attaching drywall to studs/rafters/subflooring, etc., you should use a drywall screw gun. Its design is specific to driving drywall screws without stripping or damaging them.

In this article, I’m going to tell you 7 reasons why using a drywall screw gun instead of a drill makes for a better experience when working with drywall screws – especially working on projects where there’s a lot of drywalling involved.

1. Less force required to use a drywall screw gun than a drill

Using a drywall screw gun requires significantly less force than using a drill press when driving drywall screws into drywall. This is especially true if you’re working on projects with thick drywall, plaster, or plasterboard panels. This is because drywalls screws are longer and designed with thicker metal to help avoid stripping during installation.

You can imagine the amount of pressure that would be required for one person to hold up all of these pieces of drywall while another person tries their best to drive in drywalls screws by hand!

Adding torque via impact drivers will strip drywalls screws just as easily, if not more easily, then drywall screws will strip if drywalls screws are driven by hand.

2. Drywall screw gun is quieter than drill

If you’ve ever used a drill press, you know how loud they can get. Sure, there are some models out there that don’t make as much noise, but they’re still pretty loud; drywall screw guns aren’t nearly as noisy, though because their design is to be relatively lightweight and easy to use – hence the slower speeds which mean less drywalling screws are needed per project too!

3. Less fatigue

Using a drywall gun vs drill is not just easier because drywall screws can be driven more easily, but you won’t be as fatigued after driving drywall screws into drywalls if you use a drywall gun. This is especially true if you have to work on projects with really thick drywall or plaster panels that require a lot of drywall screws!

4. Drywall screw guns are designed to prevent drywalling damage

When it comes to attaching drywall to studs/rafters/subflooring etc., various tools are used by professionals in the industry. You’ve got your cordless drill drivers for one, impact driver for another, and then another electric version too – and of course drywall screw guns. Drywall screw guns are designed to help prevent drywalling damage such as dry walls popping off of studs/rafters/subflooring, etc. This can be caused by using an impact driver, cordless drill driver or drywall saw if the drywall joint is not properly sized and cut for its application.

5. Fewer drywalls screws required

This point seems pretty obvious, but it’s important to consider nonetheless; drywalls screws require a lot of torque and force when installed, so you don’t want to end up using more drywalls screws than what’s needed either! Also, using some manual or cordless drill press (cordless drywall gun) will cause drywalls screws to strip and drywall damage if not installed properly.

6. Drywalls screws are specifically designed for installation by a drywall screw gun

Not only are drywall screws made of thick metal, but their heads are also designed to eliminate stripping or problems like popping off of studs, rafters, or subflooring if the drywall joint is not properly sized and cut for its application.

7. Drywalls screws are designed to be driven into drywalls at a certain angle

Although drywalls screws aren’t the only ones made with thicker metal, drywall screws have thick shanks to help prevent stripping when installing them too. Regarding thickness, drywalls screws are also specifically manufactured with their heads being angled so that they’re easier to drive into dry walls without causing damage or problems such as popping off of studs/rafters/subflooring, etc.

As you can see, drywall screw guns aren’t just great for hanging drywalls but also for installing drywalls screws too! That’s why it’s recommended that anyone who plans on doing drywalling at home or work should get a drywall gun.

Can you use a regular drill for drywall screws?

As a general rule, it is not recommended to use a regular drill for drywall screws.

The problem is that a conventional drill can’t resist the torque generated by the high speed of the drill and will strip or “chatter” enough of the threads on a screw to make it unusable. In other words, it’s essential to have a fair bit with a few teeth as possible – basically just long points at each end – for the device not to lose its grip on those tiny seams in drywall.

Do I need a drill or screw gun?

The answer to that depends on what you are doing. Both can be great tools that are useful in their way, but for many different projects, the type of drill will vary based on your specific needs.

If you’re looking to work with wood, a drill is usually best as it’s solely focused on servicing the material without any added power or mobility. This also applies if you’re often using sheet metal since screws need more grip and torque than simply drilling through it. With this said, a screw gun can make your project go quicker, but it won’t allow for greater depth control at larger lengths which means it may not be accurate enough if given a task where depth matters.

Is a screw gun the same as a drill?

Usually no. A screw gun is designed for driving screws, while a drill does not have that option.

An excellent way to think about the distinction between these two tools is that someone who wants to drive screws into walls would want a screw gun, while someone who wants to work on building construction sites, floors, cabinets, or furniture would need a drill with more power and functions.

Final Words

To close, we wanted to give you the pros and cons of each tool. Drywall screw guns are more compact than drills which is excellent for tight spaces like drywall seams. They also come with a depth stop that helps keep screws at an optimal distance from your surface while drilling through it. So if you’re looking for something lightweight, easy to handle in confined spaces, or want consistency when using on different surfaces, then this may be the best choice for you!

On the other hand, if your project requires heavy-duty work (e.g., concrete), high torque applications (e.g., lag bolts), or just need lots of power, then go with a drill instead because they offer much more force over time due to their higher power.


Best Wrench for Tight Spaces: Reviews, Comparisons and Buying Guide

Best Framing Squares: Reviews, Comparisons and Buying Guide

Best Torpedo Levels: Reviews, Comparisons and Buying Guide

Leave a Reply

Your email address will not be published.