Lighters are great, but sometimes they run out of fuel. The wick has to be lit by something else for the flame to spread and keep burning. So what do you do when your lighter is out of order? One of the most common problems that people have when lighting a candle is not having a lighter. Lighters are often used for lighting cigarettes, candles, and other things that need fire to be lit. This article will teach you how to light a candle without a lighter.
Related: Best Plasma Lighters: Top 10 Reviews, Comparisons and Buying Guide
Table of Contents
- 8 Ways to Light a Candle without a Lighter
- How long should a candlewick be?
- What happens if you don’t trim candle wicks?
- How long should a candle burn?
- Can you put a lid on a candle after blowing it out?
- Safety Precautions When Lighting a Candle without a Lighter
8 Ways to Light a Candle without a Lighter
1. Use another candle:
If you have two candles, the easiest way is to light one, then hold it up against another that’s not burning to transfer fire from one to the other. However, it may take a little while for your second candle to light, given how much time this method takes.
2. Use Matches:
If you have matches, strike them and bring them near enough to the wick of your taper or votive candle; they should catch fire easily (if they don’t, perhaps there isn’t enough oxygen coming off of the flame). Be careful, though; matches are small and will burn out quickly, so make sure you know where your source of fire is before attempting this method. Another option with matches is to light them and promptly drop them into a mason jar, then put a lid on the jar. This creates a mini-greenhouse effect that gets your fire going immediately.
Related: Best EDC Lighters: Top 10 Reviews, Comparisons and Buying Guide
3. Use the Stove:
If you have access to an electric or gas stove, this is probably the ideal method for you if you want more control over how fast your candle lights. There are many different options as far as how high up from your candle you place the burner; some people place it as close as two inches while others place it even further away. Test out different distances until you find one that works best for you and your specific situation/candle type (some candles work better at higher temperatures). You can also use a frying pan to achieve a similar effect, although it may take longer for your candle to light.
4. Magnifying Lens:
If you have a magnifying glass or other similar lenses, hold it up to the sun and move it around until you find the brightest spot of light on your candle wick. Next, angle the lens directly over this spot, then press down firmly to get an even transfer of heat from the lens to your flame. This can be a little trickier than using matches because there is no guarantee that conditions will be suitable for fire every time, so you might have some failed attempts before getting a success.
Flintstones produce sparks when struck together—the larger ones capable of producing bigger sparks for starting fires. If you have a metal container, this is the best way to get your fire going quickly and efficiently; otherwise, you may need to find a more sheltered spot for your flint if there’s too much wind.
6. Battery and Foil:
Put a battery in foil (with a dome shape) and touch both of its terminals to the candlewick. After a few moments, you should have enough heat transferred from the battery to the wick to light up your candle successfully. This method can be difficult because it takes some time to heat up enough for ignition, so make sure you know your source of fire before attempting this method, or else it might not work out.
7. Use Heating Elements:
There are all kinds of heating elements you can use, like the ones in electric stoves or grills. If you have access to one of these devices (or something that functions similarly), touch the element directly to your candle’s wick and wait for it to heat up enough for ignition. This method works well because you can control how long you need your element in contact with the flame, so if it doesn’t light immediately, wait a couple more seconds before trying again—it should work after a few tries.
8. The Q-Tip Method:
The last option is probably the most efficient process, although it may take longer than others, depending on your specific situation. Take one q-tip and one of your candles, then firmly but slowly swab the tip of the q-tip all over the top of your candle. Make sure you do this evenly so that you don’t miss any spots. Try doing this for thirty seconds or so, then quickly ignite the top of your candle—the wax should have melted off enough by now to catch fire!
Besides the above ways, candle lighter is a small tool which helps you to light up candle without burning your fingers. This can be a great help for lighting the candles on birthday cake, as well as in other places.
When Do You Light a Yahrzeit Candle [The Answer to Everything]
How long should a candlewick be?
The length of a candlewick depends on the size of the candle. Ideally, a wick should be so long that it can reach from top to bottom and have roughly 1-2 cm sticking out at either end when in use.
If you’re not sure what size your candles will be, then consider buying an adjustable wick for your candles that will help with any potential sizing discrepancies.
Related: How to Refill a Candle Lighter?
What happens if you don’t trim candle wicks?
It is essential to trim the candle wick every 10-12 hours to prevent a fire hazard.
Please keep in mind that a small flame is always present at the tip of the wick, right inside, where you cannot see it from the outside. Every time you snuff out a candle by blowing out the flame or blowing on it, as I’ve seen some people do–you’re just getting rid of that old flame and then letting another one grow from deep down at the bottom of your freshly trimmed wick. Eventually, too much wax will build upon your candle, and all of a sudden, it will be burning much higher with less oxygen.
How long should a candle burn?
It depends on the diameter and height of your candle.
How long a specific candle should burn varies widely. It is almost impossible to tell you exactly how long a candle would be able to last based on its dimensions without sending you something like an equation or graph. Candle wax is most commonly sold in one-pound blocks at craft or grocery stores which weigh about 2,000 grams; this equals about 4 candles (meaning 1 pound of wax = 500 hours). So if you burn candles with 500-hour lifespans evenly spaced out, 3 candles will last 7 days.
Related: How to Use a Candle Lighter?
Can you put a lid on a candle after blowing it out?
Yes, but it’s not recommended.
Lit candles will continue to melt the wax around them and pour over the sides of the offending lid. But you’ll still have light pouring out of your candle for some time afterward, so please be careful! A better idea would be to douse it with water first.
Related: Best Butane Lighters: Top 10 Reviews, Comparisons and Buying Guide
Safety Precautions When Lighting a Candle without a Lighter
Candles can provide a beautiful, relaxing atmosphere for any room. However, they are not always the most practical lighting options as it is difficult to use them when there is no lighter nearby.
Luckily, you can still light your candle without a lighter if you follow these simple safety precautions:
- Be prepared and know where matches or a lighter are before attempting to light your candle.
- If lighting on an elevated surface such as a table, make sure the candle’s surroundings do not present any potential dangers such as getting knocked over easily by children or animals. Also, check that it will fit next to other objects (such as decorations).
- Keep pets and children away from open flames. If the candle is knocked over, they may knock it over even further and start a fire. Also, if an animal goes near a lit candle, its fur could catch on fire from the flame.
- Make sure that your wick is trimmed to about one-fourth of an inch before lighting your candle, as longer wicks can cause more soot which may present breathing hazards.
- Light candles in well-ventilated areas for better scent dispersion and improved air quality.
- Extinguish any existing flames (such as those caused by birthday candles or other temporary/required light sources) before blowing out your candle, so you do not breathe them in.
- Ensure that you are using the correct type of candle for your situation. Candles come in different sizes, wax types, and colors to accommodate whatever occasion they are used. For example, taper candles work well at weddings, whereas votive candles do not provide adequate heat to warm food or beverages up if necessary.
- Light the candle away from anything flammable (such as curtains or furniture), which may catch on fire if the flame were to touch it accidentally. Also, try lighting your candle in open spaces where any fire would be easy to control should something go wrong with the flame.
- Avoid using scented candles if you know people will have allergies or sensitivities around the area.
- If you are having trouble blowing out your candle, use an alternative method such as a snuffer instead of blowing on the flame directly, which can cause it to go out too quickly or blow in one’s face.
Related: Best Way to Refill a Zippo Candle Lighter to Save Money and Time
General safety precautions include:
- Keep candles at least 12 inches away from anything flammable.
- Placing them on heat-resistant surfaces so they do not get knocked over easily.
- Trimming wicks after each use.
A candle is a delicate and useful tool. It can be used for so many things! But sometimes, the way of lighting it may not suit us well due to our current situations in life or because we don’t have access to lighter fluid at home. I hope this post helped give some tips on how to light up a candle without using any lighters!! If there’s anything else that needs clarification, feel free to comment below.
Related: Best Lighter for Weed: Top 10 Reviews, Comparisons and Buying Guide