How to Sand Drywall Like A Pro?

You have ever wondered how to sand drywall? That question has been on my mind a lot lately. I’ve always wanted to do it myself and save some money but have never found the time or know-how. Let me tell you, this blog post is going to change everything! It’s full of great tips and tricks that will help you with your next project.

You’ll learn about all the tools needed for sanding drywall, what kind of sander works best, as well as how much grit should be used when sanding down specific types of wall surfaces. There are even some photos included so you can see these things in action! This blog post is definitely worth your while – find out how easy it really is by reading.

Related: Best Drywall Sanders on the Market: Top 10 Reviews, Comparisons and Buying Guide

Table of Contents

  • Drywall Sanding Tools
  • Materials Required for Drywall Sanding
  • How to Sand Drywall? 8 Steps
  • How to Remove Scuff Marks?
  • How to Sand Drywall Fast?
  • How to Sand Drywall Corners?
  • Is Drywall Dust Toxic?
  • Is Drywall Dust Harmful?

Drywall Sanding Tools

  • Drywall sander – Drywall sanders are a great way to get the job done. These tools have been specifically designed for this specific task, with various features that will make your projects easier and faster than ever before!
  • Dust mask
  • Mud pan
  • Sanding pole
  • Shop vacuum
  • Stepladder
  • Taping knife

Materials Required for Drywall Sanding

  • 150-grit Drywall sandpaper
  • Drop Cloths
  • Hat
  • Sanding sponges
  • Window box fan

Related: Best Drywall Screw Guns on the Market: Top 10 Reviews, Comparisons and Buying Guide

How to Sand Drywall? 8 Steps

It’s a well-known fact that drywall is one of the most tedious jobs you can do in your house. It’s also not for beginners, as it requires some serious know-how and skill to get right. But with the right tools and tips, sanding drywall is actually pretty easy! Here are 8 steps to make sure you have a smooth finish.

Step 1: Preparation for Drywall Sanding

Drywall sanding produces full measures of residue; however, appropriate readiness can help shield the waste from penetrating each niche and corner of your home. Before you start, gather all instruments in the room where you will sand, including additional joint compound and a clay blade to fill in any gouges or errors. Wear a residue veil and goggles to ensure your face; you might need to cover your hair with a scarf and wear old garments. On the off chance that you have an outside window, open it a split to give ventilation. Tape plastic sheeting over any entryways prompting different regions of your home, just as over the floor and any furniture in the room. To increase your sanding knowledge, read our article about hardwood floor sanding.

Step 2: Capture Dust: How to Capture Dust When Drywall Sanding?

  • Open the windows, ensure the warming, ventilation, and cooling framework is off and hinder the air vents with plastic sheeting. Put on a residue veil.

  • Clear the central part of the drywall dust into a heap on the floor with a sweeper. You won’t have the option to get all the residue along these lines, and you’ll raise some of it; however, you can manage the buildup later. Gather the sweepings in a bucket or trash pack. Trust that airborne residue will settle before continuing.

  • Put a window box fan and point it toward the outside. Experience the room again and clear; however, do it vivaciously and direct the residue toward the fan as you do. Clearing the waste right now be considerably progressively productive on the off chance that you can open a few windows and – if conceivable – put a fan in everyone. Regardless of whether you don’t have that numerous fans, the open windows will make a supportive cross-draft.

  • Hold up an additional 15 minutes; at that point, vacuum the floor. Since the heft of the residue gone, you shouldn’t need to stress over stopping up the channel. Utilize an upholstery connection to get the dust out of corners, extricate it from between hardwood planks of flooring and expel it from tile grout.

  • Wipe the floor and all the woodwork with a clammy material to discharge the residue buildup. The fabric will handily get what’s left, and you don’t need to stress over if turning around into mud, which is the thing that drywall experts call the joint intensify that created the residue. Utilize the fabric to wipe the dust from harsh surfaces, for example, tile grout or stonework.

Step 3: Try Fine Grit Sandpaper

Most pros get the most exceptional outcomes from 150 grit drywall sandpaper. The aperture on the drywall paper may give off an impression of being stopping up during use; however, drywall dust turns into an extra rough to both pounds and clean the binding outer part, yielding a softer finish, which expands the life of the sandpaper. Be that as it may, for more straightforward and faster sanding, you’ll despite everything need to wash sandpaper bed covers often.

Step 4: Start the Sanding Work

Begin sanding the joints, creases, and around screws delicately with the sanding square. Read these 44 sanding tips to avoid mistakes.

Cautious to not squeeze the surface to abstain from “fluffing” the drywall or leaving sanding marks; sand the focal point of creases and joints sufficiently only to expel edges and knocks.

Additionally, abstain from sanding in an orderly fashion or going over a similar region a similar way, the two of which can leave furrows or sorrows. Instead, move the sander around in a bent movement.

Step 5: Using Drywall Pole Sander

Utilize a convulse stroke with a Pole sander. Your shoulders may go to elastic; however, utilizing a pole sander is quicker and more straightforward.

Pole sanders are increasingly hard to run; use the convulse movement or a backward and forward clearing movement.

Contort the haft to sway a rotating appendage on the sanding top that will move the development of the forefront and permit the sander to both shift headings and pivot within corners where creases unit.

Turn the leader of the sander more extensive to work over creases or smaller to sand with latch strips.

Restrict hand and pole sanders to the “area” of divider or roof. On the off chance that you work excessively near inner corners, these instruments may pummel into neighboring dividers, scratching the completion.

The pole sander, with rotating appendage in the sander top, is inclined to turn over and cause harm.

Check out the video below to know the using of a pole sander:

Step 6: Sand with a Light Touch for Painting Prep

When you’ve done the central part of the drywall sanding, change gears and instruments to complete dubious “artfulness” regions like electric-powered outlets or lights and inner corners. If you want to pick a hand sander for artfulness work, you can; however, a superior decision around vents is handheld coarseness paper.

Use the sandpaper with an agreeable—a slight touch to abstain from scraping and grooving the area thoroughly. On the off chance that your sanding reveals and, at that point, rub tape, apply additional mire, plume out, let that soil dry and cautiously sand once more.

Step 7: Using a Sanding Sponge

Hand sanders slog incredible on inner corners, and however while softening one part, you might wind up and over sand, the contrary part, cut a profound channel which will necessitate a clean up of mire to make it fix. Aside from that, utilize a fine-coarseness, calculated, dry/wet sanding wipe to work every side of within corners.

Solidly grasp a calculated sanding wipe, apply consistent weight, and move here and there, inner corners for a direct. Proceed that sponge in a round motion to quill the progress border of the completed corner crease.

Step 8: Preparation for Painting

In the wake of sanding drywall, get ready for painting with clearing the area or vacuuming it to wipe off all the residue. Clear off the gathered waste from within the region and residue balls from extensive taped creases and clasp strips. Something else put a smooth layer of residue over the whole drywall surface, particularly along the change borders of the ridges and latch pieces. The waste will tie with paint and give a plaster to veil scrapes, holes, and abraded surface paper. Paint will not be wasted if you have a good idea about the paint estimate while preparing for the paint.


Avoid Scuffing the Drywall

Pro Tips

How to Remove Scuff Marks?

  1. 1

    Cautiously sand the change edge between the taped creases/strips and the exposed drywall to abstain from scraping the drywall’s paper face.

  2. 2

    Abstain from rubbing or abrading the paper surface of the drywall because those imperfections might be evident in the wake of painting.

  3. 3

    The edges all things considered and clasp strips should look delicate and smooth after Sanding.

Editor’s Tips

How to Sand Drywall Fast?

Sanding wipes can utilize to sand drywall and intends to use wet. The wet wipe is then worked over the surface to smooth the drywall. The sandpaper surface of the wipe works a lot of like a hand sander, while the dampness mellow and smooths the drywall. This strategy is otherwise called “dustless” sanding because of the severely diminished residue from the wet wipes, which trap the sanded compound. Block wipes, without sandpaper surface, can likewise be utilized. Some laborers incline toward the regular wipe since it expels less mixture at once, reducing the danger of harm to the creases.


How to Sand Drywall Corners?

  1. Spread the compound, and spot the tape. Spread the joint mixture in any event 1/8. Thick over the length of the joint. Beginning in the corner, cautiously place the tape on the outside of the compound over the joint. Press the tape into the mixture.
  2. Bed the tape with a drywall blade. Beginning from the middle, bed the tape by moving the edge against the joint with medium weight.
  3. Apply the mixture to each side of the corner. Similarly, likewise with the level creases, don’t hold back on the compound at this progression—synthesis 1/8. Thick is about right.
  4. Apply the mixture to each side of the corner. Similarly, likewise with the level creases, don’t hold back on the compound at this progression—synthesis 1/8. Thick is about right.
  5. Overlay the tape to fit in the corner. All paper tape has a wrinkle along the middle to permit it to overlay effectively and provide cozily in turn. To put the tape, keep it pulled tight, squeezing it into the hole each 24. Rather than along the entire length.
  6. Bed tape from the top. From the start, utilize lightweight with the blade to abstain from pulling the tape away at the top. After the leading foot of tape is set in the compound, apply more weight.
  7. Apply tape to the roof as you did in the corners. To apply more weight, hold the blade at a lofty edge. It permits the module to press the tape firmly in the corner. After this pass, the vast majority of the compound evacuates as the tape installed. The edge ought to be feathered right to the tape.
  8. On a subsequent day, finish one side of each corner. Apply the wet compound so it doesn’t cover. The edge of the taping blade rides on the base layer of dry mixture applied the day preceding. Keep the handle corresponding to the connecting divider to keep the compound from stacking up on that divider.
  9. On a subsequent day, finish one side of each corner. Apply the wet compound so it doesn’t cover. The edge of the taping blade rides on the base layer of dry mixture applied the day preceding. Keep the handle corresponding to the connecting divider to keep the compound from stacking up on that divider.
  10. On the third day, finish the corner’s opposite side. While applying the opposite side of the completion coat, the edge of the taping blade rides on the connecting dry layer of the compound. In case I’m mindful so as not to let abundance compound develop, I can accomplish an about flawless inside corner that requires negligible sanding.

Check out the video below for more knowledge about drywall sanding:

Health Tips

Is Drywall Dust Toxic?

The “irritation dust” from joint-compound mud utilized in drywall work can contain toxic materials. Also, there can be perilously high measures of residue from sanding and other drywall work.

Is Drywall Dust Harmful?

The sanding procedure powers little particles of drywall and joint compound into the air, making drywall dust.

The residue may carry material, including gypsum, powder, mica, silica, and calcite – fixings studied to cause medical problems when breathing. Gypsum can disturb bodily fluid films and the respiratory framework. Powder or bath powder can disrupt the respiratory structure, harm the lungs, and can add to the advancement of malignant growth. Introduction to powdered mica can prompt fibrosis of the lungs and long haul respiratory challenges. Silica can cause a risky condition called silicosis and other wellbeing conditions. Calcite contains calcium carbonate, another substance related to silicosis.

A transient prologue to drywall dust irritates the eyes, skin, and respiratory structure. Dusty structure goals can make hacking fits, throat aggravation, and breathing difficulties. Long stretch introduction extends the danger for progressively favorable prosperity conditions identified with the buildup fixings.


Sanding drywall seems like a lot of enjoyment as watching paint dry. Try not to stress; however, it is anything but a convoluted venture.

Leave a Reply

Your email address will not be published.