Maybe you’ve been wanting to get started with woodworking, but you’re not sure where to start. One of the first tools you’ll need is a disc sander. It’s an invaluable tool for shaping and smoothing pieces of wood- no matter what your skill level. The best part? These machines are super affordable, so anyone can get in on this craft! If you’re ready to build your own furniture or just refinish some old ones that have seen better days, then it’s time to invest in a disc sander!
Ever wondered how to use a disc sander? Well, it’s pretty simple. I’m going to show you the basics on how to use a disc sander and some tips for getting the best results.
Table of Contents
- 7 Steps for Using a Disc Sander
- How to Change Sandpaper on a Disc Sander? 3 Easy Steps
- How to Replace Disc Sander Pad?
- How to Get Adhesive off of Disc Sander?
- Disc Sander Safety: 12 Must Know Rules
7 Steps for Using a Disc Sander
Below, we’ve detailed the way to use a disc sander.
Step 1: Prepare the Area
Deciding such things as proper oxygenating and having everything you are getting to need accessible will obstruct an excellent deal of your time and frustration. Disc sanders are stationary like on a desk, and selecting this location where it can become a permanent fixture will prevent you from having to maneuver later.
Choosing a well-oxygenated location will help reduce having to inhale any particles. Even after your finished sanding, these particles can still be airborne, and breathing them can become hazardous to your health. Also, creating a plastic barrier can quickly be done by placing plastic around the immediate area, which can help make cleanup more comfortable and keep the dust from spreading to other areas.
Step 2: Wear Appropriate PPEs
First and foremost, think about safety, as is that the case with most safety equipment, make sure to collect and wear all of the right safety equipment. The disc sander works under a high level of force, so wearing such things as safety goggles, masks, and gloves will naturally provide you the best level of protection.
Also, make sure not to wear any loose-fitting clothing like a baggy shirt or an apron. For those with long hair, Make sure to tie your hair back.
Step 3: Set Up the Disc Sander
Disc sanders are available for an excellent array of sizes and counting on the precise model. Many have many various features also and understanding what exactly you’re intending because the degree of features you’ll be using will need to found out before use.
Step 4: Prepare the Material
Setting up the sander based while considering the table tilt, miter gauge angle, rip fence, saw guard, and the other accessories like a hose for dust collection. Also, this is often the time to prep the fabric being also sanded intrinsically as making and making measurements.
Step 5: Use the Disc Sander
Now is the time to place your power sander to use. Activate the sander and wait until the disc reaches full speed before sanding. The drive itself moves during a counterclockwise motion, so use the whole CD for more substantial material or the left side of the disc for smaller equipment.
While using the sander, make sure to stay your fingers faraway from the disc itself. It’s recommended to not place your fingers any closer to the sanding disc than 4 inches and always, and that I mean always keep tabs where your fingers are in the least times. It might appear to be sensitive, but you’ll be surprised at what percentage unintentional and avoidable accidents occur annually due to this.
With the sander on, carefully push the fabric closer to the disk on the side you would like sanded. Apply an existing quantity of strength as you never want to use an excessive amount of energy when using any machine because the tool itself should be doing the bulk of the work. When the fabric makes contact with the rotating disc, move it from left to right, is bound to keep the fabric moving in the least times. If not running the fabric during a constant fashion, you’ll notice a blackened color where it is sanding.
In our blog section, we wrote an in-depth article about 44 Creative Sanding Tips. Before starting the sanding work, we suggest everyone to read the article once.
Step 6: Adjust as Necessary
While sanding, it’s going to be necessary to form adjustments like the miter gauge angle, depth, or tilt. No reconciliation should work during the sanding disc is open and still in motion as this too may be very dangerous.
Step 7: Power off and Unplug the Sander
Make sure always to power off the sander and unplug. Ultimately, finishing your project is what you’re trying to realize. Still, if you are doing so in an unsafe manner, it’s going to cause a regrettable and avoidable incident inevitably.
Check out the video below if you want to know how these sander work!
How to Change Sandpaper on a Disc Sander? 3 Easy Steps
Always try to use a quality brand. Using cheap will make you metal disc all sticky, and it will take a long time to remove all the stains. Prefer at least 80 grits as you can use it as multipurpose grit.
Do not remove the wax paper thoroughly and apply it to the sandpaper to the disc. Because you won’t be ready to slip it between the table and, therefore, the CD without the gum catching the drive before you’ll align it properly.
Fold the paper 1/3 then slide into it. That way, you’ll hold the 1/3 sticky section far away from the disc until you’ll get your sandpaper centered on the drive. Once it’s centered, press the 1/3 sticky part onto the disc. Then rotate the disc 180 degrees and pull back the sandpaper so you’ll grab the paper and pull it off. Press the remainder of the sandpaper in that place.
Check out the video to learn more about changing sandpaper on a disc sander.
How to Replace Disc Sander Pad?
Before changing it, make sure you turn off the appliance. Turn it over, facing the disc, pull out the drive starting on the side, and moderately traveling the bottom of the pad. Then pulling it lightly, restore it with a replacement, and make sure that you simply follow the instruction carefully.
How to Get Adhesive off of Disc Sander?
Several chemical motorized cleaners resolve traverse any lasting adhesive scum but prefer employing a citrus-centered cleaner. Use a duster and, therefore, the filter to get rid of the timeworn adhesive, then rub the platen downward with a glass cleaner, and let that dry. That makes sure a fresh outward to which the pure sanding disc will unit. Or use a hand blower to warm that rough disc platen and moderate the adhesive. Working on one sector at a time will, therefore, that drive will get peel neatly off.
Disc Sander Safety: 12 Must Know Rules
- Make sure you wear an ear and eye protector and dust preventing mask. If you are working on a considerable quantity of smoothing, then wear an inhalator.
- Never reach over the sanding disc while it is running.
- Don’t activate the facility with that regular contact the workbench or previously in touch with the sanding disc.
- Every time grit on the descending gesture sideways of the drive. The revolving helps to carry the task in contradiction of the bench. Sanding on the rising side will boost the part off the board and source an inducement.
- Uphold a 1/16″ highest consent in the middle of the counter and that drive. One exclusion is once you utilize the plume to progress the circle. Then maintain a 1/2″ most top clearance.
- Ignore sanding in the top ounce of 3/4″ standard, which is more extensive than 5-1/2″. The revolving of that disc can get full lift boarding off the bench.
- Use a working desk. If it is necessary, add an extension table.
- Always sand with a stand subsidiary the run-of-the-mill.
- When you are utilizing the plume feed-stuff to improve the disc, copy the share with the split barrier. If that range is lengthy to the backstop, hold the stock to that worktop.
- Before turning on the disc sander, make sure you check and adjust the worktable or extension table.
- Keep in mind to turn on the dust collector.
- When you turn on the sander, wait for sometimes until the sander has come to the fullest speed before sanding as it can damage the disc.
These are some of the safety instructions that you should know when using your disc sander. Always remember these safety tips.
The disc sander is beneficial equipment for shaping the rough wood. Now you know how you can imply the disc sanding method. But always remember the safety precautions before you disc sand. Till then, Happy Disc Sanding.
How to Use a Straight Line Sander?
How to Use a DA Sander?
How to Use a Spindle Sander? 7 Steps
How to Use a Belt Sander? [9 Effective Steps]
How to Use a Palm Sander? [11 Steps to Follow]
How to Use an Orbital Sander Like A Pro
How to Use a Floor Sander Like A Pro? [Tips & Tricks]