Are you a DIYer? Do you enjoy refinishing furniture, working with wood, or other projects around the house? If so, then this post is for you! Today I’m going to tell you how to use a palm sander. You’ll learn about what they are and why they’re useful as well as how to operate one safely. Let’s get started!
Table of Contents
- What is a Palm Sander?
- How to Use a Palm Sander? (11 Steps to Follow)
- Video: Using a Palm Sander
- How to Put Sandpaper on a Palm Sander?
- How to Keep Palm Sander Sheets from Tearing?
- How to Distress Furniture with the Palm Sander?
- How to Cut Sandpaper for a Palm Sander? (4 Steps)
- How to Fix Palm Sander?
- Final Words
What is a Palm Sander?
A palm sander is one of the littlest and most effortless to utilize gadgets right now accessible to artisans and the average carpenter. It named because clients can control the sander by setting their palm on the top and using physical work to move the electric sander to and fro over a bit of timber. It has over twofold the intensity of an average human doing the sanding, and in this way, leaves a smooth completion and finishes work in record time.
It’s important to make sure the right tool is being used for your task. Some people may not be aware of how specific palm sanders work, so we’ve compiled this list with all of our favorite models!
How to Use a Palm Sander? (11 Steps to Follow)
Step 1: Turning on the Palm Sander
You need to realize first to turn on the force catch of the sander to make it run. Else, you won’t have the option to work with it as a sander of wood. Press a sanding cushion onto the unit’s foot, coordinating up the fumes gaps, if it has them. Hold immovably and turn it on. You’ll feel the odd, wavering movement of the sander. At the point when it comes up to speed, bring down the cushion, ensuring it’s corresponding with the work surface, and reach. The cushion will accomplish all the work. Supplant the cushion when it gets stopped up.
Move the sander to and fro over the grain. Try not to apply strain to the sander.
Step 2: Caring About Safety
Put on your wellbeing goggles and earbuds to avoid getting sawdust in them. Then put a dust mask over top for good measure!
Step 3: Pick Your Paper
Start with a coarse coarseness, and afterward stir your way up to better papers. You’ll have to inspect the condition of the wood to choose what roughness is ideal. On the off chance that the material is exceptionally unpleasant, start with a coarse (40-60 coarseness) paper, at that point work up to a medium (80-120 coarseness) and, in the long run, a fine (150-180 coarseness) paper. Then again, if your material is as of now fit as a fiddle, and you’re attempting to get an extra-smooth completion, start with an excellent paper (150-180 coarseness) and work up to a fine (220-240 coarseness) or extra-fine (280-320 coarseness) paper. To get the complete knowledge about sandpaper coarseness, we recommend to go through this article which is published in our blog section.
Step 4: Measure and Attach Paper on
Settle on a coarseness, measure, and slice the sandpaper to estimate. Addition the sandpaper by opening the sander’s brace lock, putting the paper, and fixing the clip lock. Rehash on the two sides to ultimately make sure about the sandpaper.
Step 5: Secure Material
Secure the material you’re sanding to the work surface with clips. At that point, turn on the sander and bring it up to max throttle.
Step 6: Knowing the Capacity of the Square Pad
The square cushion of a palm sander can acknowledge the quarter of standard sandpaper. Thus, cut it into pieces varying. After making the quarterly bits of an ordinary sandpaper tie firmly with the sanding cushion.
Step 7: Start to Sand
Spot the sander superficially and move it in long, even strokes. Ensure you’re moving just to and fro toward the sander and along the wood grain. Running contrary against the grain knicks the material, makes chips and eventually nullifies the purpose of sanding. Get the idea of sanding mistakes so that you can perform the sanding work accurately
Step 8: Wipe and Switch
Commonly, it just takes two or three goes with each sandpaper before your end of changing the sandpaper, starting with one coarseness then onto the next. It may shift somewhat with harder employments, yet the measure of passes ought to be minimal.
Make sure to wipe down the material during sanding before sanding with another coarseness of Paper. Utilize a dry cloth that will help dispose of sanding dust and different particles before sanding with a better coarseness paper. Rehash this procedure through each coarseness of paper until you wrap up with a 280 coarseness paper and the smooth surface precisely as you would prefer.
Step 9: Collecting the Accumulated Dust
In the time of sanding the wood, you need to see the residue gathering gap. At the point when the residue gathering opening gets full, you need to clean it to sand thoroughly.
Step 10: Determining the Depth
Before utilizing the sander on the wood, you need to fix how profound it will get sanded. If you don’t do it, you may not get a fruitful sanding on the wood, or it might harm your wood, making a lot of profound than your need.
Step 11: Finishing Touches
Turn the sander off and switch sandpaper for one of a better coarseness, varying. Keep sanding and exchanging paper until the undertaking gets done. Wipe the wood of any sawdust with a tack fabric.
Video: Using a Palm Sander
How to Put Sandpaper on a Palm Sander?
The way toward putting sandpaper on a palm sander is fundamental once you realize what sort of sandpaper you need. You should simply marginally open your palm sander to the midpoint, overlap over the sandpaper, and afterward embed it on restricting parts of the bargains. At that point, you can close it and start sanding effortlessly. In case you’re uncertain about whether you’re supplanting the paper accurately, search for the particular guidelines that accompanied your gadget. Simply make sure to pick the correct sandpaper.
How to Keep Palm Sander Sheets from Tearing?
If you are simply sanding wood, and they are detaching immediately, at that point, you may be squeezing excessively hard or need to utilize better sheets. The item is to let the sander accomplish the work for you. Pressing too hard will cause tearing sheets or untimely disappointment of the sander. To learn more, read our article about use of sandpaper sheets.
How to Distress Furniture with the Palm Sander?
Initially, you genuinely need to know your sandpaper. There are various cornmeal/surfaces. The least the number on the sandpaper, the higher the coarseness.
If sanding a polish right off the piece, utilize finished sandpaper. Typically a 50 or 60 grit. When upsetting the painted completion on painted wood, for example, a bit of furniture, use anyplace from a 100 to 120 coarseness. On enormous pieces, use palm sander. Rub the sander up and down the edges that would have generally worn over time. Even those were 50 years of age. Daintily utilize the sander to the whole piece to blur the paint and give it a progressively characteristic appearance. Strengthen the edges by squeezing harder with the sander, yet additionally, blur the lettering and any flaws on the wood. The palm sander works ideal for these and, again, uses around 100 cornmeal. You will get the vibe for the sander the more you use it.
Upsetting isn’t troublesome, yet certainly takes experimentation. It’s just a question of getting settled with the sandpaper and the work.
How to Cut Sandpaper for a Palm Sander? (4 Steps)
- Turn your paper over, so the lumpy side is looking down. Imprint any size and shape you need on this smooth paper side.
- Utilize your copyist along a straight edge and Score the Paper.
- Try not to utilize edged or shearing cutting apparatuses.
- Try not to utilize blades, scissors, or shears. In case that you need “only a strip” or you’re not worried about a spotless, clean edge, overlay and wrinkle your sandpaper well indeed, with the paperback to the outside. It will tear pleasantly, however, set up for lopsided wrinkling or feathered edges, particularly with coarser cornmeal.
Palm Sander Troubleshooting
How to Fix Palm Sander?
Pick up a spray can of electronic cleaner. Do it in an area where it is okay to mess on. Pull the counter and put it in a safe place. Take a drill point and put it on the drill and pull out the screws.
Open the sander and make sure your sander is unplugged. You will find an “O” ring there, take the pad out. Inside you will find two more squares holding it in. You will see a round ring take that out and take the padding out. Make you sander upside down and open all the screws using the drill.
Take one side off, and hope that the motor stays with the other hand. There might be a reason why this thing doesn’t work anymore. Blow the things out using compressed air, cleaning off the electronics with the electronics cleaner. That this will look better and start running again.
Always make sure your sander is unplugged. Wear eye and ear protection, and it is going to make a lot of noise. Spray on the commutator. If those brushes pop out, you can just push them back in again. If the switch got burnt out, take a hard wire and put an inline switch. But spraying electronics cleaner into the switch can fix the problem. If it got jammed, it would work well. So, it is easy and always remember the safety precautions.
Figuring out how to work a palm sander will give you included abilities. There is a wide range of undertakings that a palm sander can handle. When you have worked on working the instrument, it should get one of your top choices because of its convenience and incredible adaptability.